XDS560v2 System Trace Emulator

The Blackhawk XDS560v2 System Trace Emulator (BH560v2) is based on the new XDS560v2 system trace reference design (XDS560v2) from Texas Instruments. The XDS560v2 design is the next-generation of the high-performance XDS560-class technology first made available by Blackhawk with the USB560/LAN560 and XDS560 Trace.

The XDS560v2 design includes both high-speed USB 2.0 and 10/100Mbit Ethernet host interfaces, multi-color state and activity LEDs and a flexible, ribbon-ized coax JTAG cable. Along with traditional JTAG (IEEE 1149.1) the XDS560v2 adds support for IEEE 1149.7 (previously known as cJTAG) and system trace (STM), an interface on the TI heterogeneous multi-core (ARM + DSP) devices. If you are familiar with the Blackhawk USB560 or LAN560 products, you will already be familiar with this new emulator design.

As with our LAN560 product, the Ethernet connection of the BH560v2 allows developers share access to target boards without the need of another computer.  Migrating from a LAN560 to the Blackhawk XDS560v2 is easy.

The System Trace capability is compliant to MIPI STP.  For those that are not familiar, MIPI STP expands to Mobile Industry Processor Interface System Trace Protocol.  See www.mipi.org for more details.  Access to this capability is provided by TI CTools enabled devices for debug and optimization of multi-core processors.  This helps users look at the synchronization and timing between cores and on-chip peripherals in their application.  For more information on the CTools, please refer to the TI Wiki site at: http://processors.wiki.ti.com/index.php/CTools.

The BH560v2 meets all of the TI reference design features and requirements and extends (improves) capabilities by offering the Enhanced Features listed below.

 
Features
  • Development Environment and Operating Systems
    • Compatible with CCS v4.2 and later
    • Windows XP/Vista/7 & 2003 Server (32 and 64-bit editions) Linux
  • Debug Interfaces
    • Supports IEEE 1149.1 (JTAG)
    • Supports IEEE 1149.7
    • System Trace Support
      • Mobile Industry Processor Interface (MIPI)
      • System trace Protocol (STP)
      • 1-4 pin System Trace
      • 128 MByte System Trace Buffer
  • TI Embedded Processor Support
    • C2000, C5000, C6000, ARM, ARM Cortex, Sitara, OMAP, DaVinci, TMS470, TMS570, Stellaris and more
    • Compatible with CTools enabled devices
  • Target Physical Connections
    • 60-pin MIPI
    • 20-pin ARM Multi-ICE (via pin converter)
    • 14-pin TI (via pin converter)
    • 20-pin cTI (via pin converter)
    • 60-pin TI Trace (via pin converter)
  • Target Cable
    • High-Speed Data Coax Ribbon Cable (12.5 inches) with Native 60-pin MIPI HSPT Buffer Board
  • Target Electrical and Signal Interface
    • Auto-sensing target voltage range from 1.2 to 1.4 volts
    • Auto-Adaptive Tesk Clock (TCK) up to 50 MHz
    • 100MHz Export clock compliant to MIPI STP
    • ESD Protection on target and host connections
    • Detection of target power loss and cable disconnects
    • Auto -compensating calibration for edge jitter, channel skew and duty cycle
    • Adaptive receiver for setup/hold times (up to 1.5ns)
  • Indicators
    • Three Activity LEDs (red, green and amber)
    • Three State LEDs (red, green and amber)
  • Host Interfaces
    • High-Speed USB 2.0 (480Mb/s)
    • 10/100Mb Ethernet (LAN)
  • Power Options
    • External Power Supply Brick
Enhanced Features
  • Power Options
    • USB cable (bus-powered)
    • Power over Ethernet (PoE)
      • Includes IEEE 802.11af compliant RJ45 connector
      • Compatible with existing PoE switches and routers
    • External Power Supply
  • LED Indicators
    • Additional LED indicators for power and USB activity
    • Indicators are oriented so they can all be easily viewed during debug
  • Configuration and Test
    • Bh560v2Config - Comprehensive Graphical Configuration and Diagnostic Tool
      • Operates over USB and Lan
      • Automatically locates (searches for) XDS560v2 units connected via USB and on the network (LAN)
      • Set Device Parameters, such as TCP/IP address
      • Tests target connection and scan chain integrity
      • Performs in-field firmware upgrades

Data sheet , Price
 
System Requirements
  • PC running Windows 2000 or later
  • Linux
  • 2GHz or faster Pentium-class or equivalent PC
  • Local CD/DVD drive
  • Available USB and/or Ethernet port
  • At least 1 GB RAM
  • Code Composer Studio v4.2 and later
In the Box
  • XDS560v2 System Trace Emulator Pod
  • System Trace Coax JTAG Cable
  • MIPI60 buffer board
  • Pin Converters: TI14, TI20, and ARM20 targets
  • USB Cable
  • Quick Start Guide
  • CDROM
  • Product Registration Card
    • All the items listed for model BH-XDS-560v2-BP plus...
      • CAT5e Ethernet Cables (2)
      • PoE Injector (power supply)
      • AC wall cord (US, EU, IL or UK)
Order Information
  • BH-XDS-560v2-BP: Blackhawk™ XDS560v2 System Trace Emulator (bus-powered)
  • BH-XDS-560v2: Blackhawk™ XDS560v2 System Trace Emulator