Emulators for Texas Instrument DSP/MCU

USB560BP JTAG Emulator

The new bus-powered Blackhawk USB560BP is the third generation of the widely used XDS560-class emulator first introduced by Blackhawk and the only bus-powered USB JTAG Emulator that supports all of the advanced capabilities of Texas Instruments latest MCU´s and DSPs. These capabilities include high-speed Real-Time Data Exchange (RTDX)™, lightning speed downloads and Advanced Event Triggering to quickly find and fix real-time software problems.

The emulator pod, which is about 150g in weight, does not require an external power supply! Features include a variable TCK (timing clock) up to 50 MHz and highly flexible 6 inch cable assembly suitable for use from 5.0 volts down to 0.5 volts to support TI low-voltage device roadmap. Software compatibility with all versions of Code Composer Studio™ (CCStudio) integrated development environment (IDE) v2.2 and above, and a driver independent DLL developed by Blackhawk, assures existing and future device compatibility for new DSPs right out of the box with no upgrades required.

The Blackhawk USB560BP JTAG Emulator is compatible with Code Composer Studio and its Flash-burner utility.

USB560BP also support Native adaptive clocking for TI ARM based devices

The Blackhawk™ USB560 JTAG Emulator is backward compatible with USB v1.0/1.1 and can handle very low I/O power supply voltages (0.5 to 5.0 volts) while preserving compatibility with previous XDS510™-class devices. The XDS560-class technology extends capabilities to the developer by providing dramatically faster high-speed Real-Time Data Exchange (RTDX)™ bandwidth for real-time visibility, significantly faster code downloads for better productivity and Advanced Event Triggering capabilities to quickly find and fix difficult real-time software problems. These new key features increase productivity for designers and shorten time to market for new DSP applications.

USB560BP JTAG Emulator

Features

Benefits

System Requirements

In the Box

Order Information

USB560BP JTAG Emulator The new bus-powered Blackhawk USB560BP is the third generation of the widely used XDS560-class emulator first introduced by Blackhawk and the only bus-powered USB JTAG Emulator that supports all of the advanced capabilities of Texas Instruments latest MCU´s and DSPs. These capabilities include high-speed Real-Time Data Exchange (RTDX)™, lightning speed downloads and Advanced Event Triggering to quickly find and fix real-time software problems. The emulator pod, which is about 150g in weight, does not require an external power supply! Features include a variable TCK (timing clock) up to 50 MHz and highly flexible 6 inch cable assembly suitable for use from 5.0 volts down to 0.5 volts to support TI low-voltage device roadmap. Software compatibility with all versions of Code Composer Studio™ (CCStudio) integrated development environment (IDE) v2.2 and above, and a driver independent DLL developed by Blackhawk, assures existing and future device compatibility for new DSPs right out of the box with no upgrades required. The Blackhawk USB560BP JTAG Emulator is compatible with Code Composer Studio and its Flash-burner utility. USB560BP also support Native adaptive clocking for TI ARM based devices
	Features Bus-powered, no power supply needed XDS560™-based Emulator High-Speed RTDX support Data rates of over 2 MB/sec Windows® Plug n' Play installation Compact pod with status indicator LED High-speed USB 2.0 (480 Mbits/sec) port Plug and Play Installation 20-pin cTI (compact TI) JTAG header Weight less than 150g Supported TI Devices Sitara DaVinci OMAP Stellaris Delfino Piccolo C5000 C6000 C2000 TMS470 TMS570 ARM7 & ARM9 ARM Cortex -A8 ARM Cortex -M3 ARM Cortex -R4F Data sheet USB560BP , Price , Complete list of Supported MCU´s and DSP´s
	Benefits Lightweight and compact with less to carry Takes advantage of the new, faster generation of TI emulation technology Real-time visibility into design, speeding the design to market Quickly find and fix real-time software problems Up to 100 times faster than XDS510 class emulators Use across all TMS320 architectures including the DaVinci platform Use with new and existing host machines Dependable and reliable host interface Preserves current software and board investments System Requirements Code Composer or Code Composer Studio IDE PC running Windows 2000 or later USB1.x or USB2.0 port In the Box USB560BP JTAG Emulator 20-pin cTI (compact TI) to standard 14-pin JTAG Adapter USB Cable Installation CD Quick start guide Order Information BH-USB-560BP: Blackhawk™USB560BP JTAG Emulator BH-USB-560BP-BNDLv4-N01: Blackhawk™ USB560BP JTAG Emulator and Code Composer Studio v4 Single user Node locked license BH-USB-560BP-BNDLv4-F01: Blackhawk™ USB560BP JTAG Emulator and Code Composer Studio v4 Single user Floating license
	The Blackhawk™ USB560 JTAG Emulator is backward compatible with USB v1.0/1.1 and can handle very low I/O power supply voltages (0.5 to 5.0 volts) while preserving compatibility with previous XDS510™-class devices. The XDS560-class technology extends capabilities to the developer by providing dramatically faster high-speed Real-Time Data Exchange (RTDX)™ bandwidth for real-time visibility, significantly faster code downloads for better productivity and Advanced Event Triggering capabilities to quickly find and fix difficult real-time software problems. These new key features increase productivity for designers and shorten time to market for new DSP applications.